Neatform Fabrication Methods
a) Frame Method
 Description
Single skin of Neatform attached to
a framework.
Example Applications
Used in applications where light-weight
is an advantage, such as exhibition cabinets, columns, displays,
wavy walls, ceilings, stage and film sets
Features
& Benefits
• Fast fabrication
• Fast finishing
• Light-weight
• 6mm / 1/4” thick (nominal) + surfacing material
Fabrication Method
Single
skin
Frame Method - Directions
1. Fabricate a framework with sufficient shaped
and supporting ribs to support a single skin of
Neatform.
For example – curved ribs would typically
be set at
350mm / 14” to 400mm / 16” centers.
|
|
2. Straight ribs used to support the curved ribs
should be set-back from the face of the curved
ribs to ensure they do not interfere with the
Neatform.
3. Cut
the Neatform to rough shape and offer up to the
framework to ensure a good fit. Position the Neatform
grooved face inwards unless making a feature of
the grooved surface.
|
|
4. Apply a good coat of PVA glue to mating surfaces
on the framework and Neatform, and finally position,
while noting that it is not necessary for the Neatform
grooves to be filled with glue. A paint roller is
an ideal tool for this job.
|
|
5. Either tack into position with hot melt adhesive
if access to the back face is available, or staple
– see fabrication tips.
6. Trim
to shape and finish in the normal way. |
|
|
|
